home *** CD-ROM | disk | FTP | other *** search
- Path: a1200.iaehv.nl!gertjan
- Newsgroups: comp.sys.amiga.hardware
- From: gertjan@a1200.iaehv.nl (Gertjan van Ratingen)
- Subject: Re: GVP A1230-II OK with PCMCIA
- References: <19960219.10E42B0.14EAF@kennelly.dungeon.com>
- X-NewsSoftware: GRn 2.1 Feb 19, 1994
- MIME-Version: 1.0
- Content-Type: text/plain; charset=iso-8859-1
- Content-Transfer-Encoding: 8bit
- Message-ID: <gertjan.0axg@a1200.iaehv.nl>
- Date: Sat, 2 Mar 96 12:19:33 +0100
- Organization: An Amiga node polling off InterNet Access Eindhoven 040-439436
-
-
- In article <19960219.10E42B0.14EAF@kennelly.dungeon.com> mike@kennelly.dungeon.com (Mike Kennelly) writes:
-
- > I have a 40MHz card, with 68882 FPU and 4Mb of RAM. I want to add a further
- > 4Mb (GVP SIMM in second socket). Will this conflict with the PCMCIA port?
-
- No. The memory on the GVP sits in a different memoryspace than the PCMCIA
- addresses. Sysinfo says my GVP memory is at $01000020 to $01800000.
- PCMCIA addresses are in the 24-bit space ($00600000 to $00a60000).
-
-
- > I need to know whether I will be able to connect a Squirrel PCMCIA SCSI
- > adaptor at a later date if I have 8Mb on the card.
-
- No problems there! (I should know, I have 8 MB on my A1230)
-
- --
- Gertjan 'Bugs' van Ratingen a.k.a. gertjan@a1200.iaehv.nl
- CD-i/Amiga Software Engineer "Trust me, I know what I'm doing" -Sledge Hammer
-